NEC PA271W-BK MultiSync PA231W-BK : user's manual - Page 7
C.1, English - lcd
UPC - 805736034844
View all NEC PA271W-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English 4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor. NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module's life. USB downstream*2 30° Tilt A Type A Type Highest Stand Position B Type USB downstream USB upstream1 USB upstream2 DisplayPort-2*4 DVI-1 DisplayPort*3 D-SUB*1 DVI-2 B Type Figure C.1a DC-OUT* Power cord * NEC optional product attachment (except PA301W). Do not use this connector unless specified. Figure C.1 5. To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks firmly and evenly (Figure C.2 and Figure C.3). 6. Please check that you can still rotate, raise and lower the monitor screen when you have installed the cables. DVI-1 Cable USB Cable DisplayPort Cable D-SUB Cable*1 Power Cord Figure C.2 *1 Only for PA231W/PA241W. *2 Connect sensor to this port for self calibration (PA301W). (See page 34) *3 DisplayPort-1 for PA301W. *4 Only for PA301W. Power Cord D-SUB Cable*1 DVI-1/DVI-2 Cables DisplayPort Cable USB Cable Figure C.3 English-5