NEC PX-42VM2A 42MP2 - Page 17

External Speaker Connections SPEAKERS MUST HAVE MORE THAN 7WATT RATING IMPEDANCE 6 OHM LEFT RIGHT EXTERNAL CONTROL REMOTE CONTROL CONTROL LOCK ON/ OFF AC IN LEFT RIGHT AUDIO 2 AUDIO 1 RGB2/ DVD2/ HD2 RGB 3 (Digital RGB) RGB 1 R/CR/PR G/Y B/CB/PB HD VD L(MONO) R VIDEO 1 VIDEO 2 VIDEO 3 L(MONO) R Y CB/CR PB/PR L(MONO) R AUDIO 3 External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, DVD or RGB signal sources. External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs. CAUTION: Unplug the plasma monitor and all connected components before connecting external speakers. Use only speakers with 6-ohm impedance and a power output rating of 7 watts or more. To connect external speakers directly to the plasma monitor: 1. Strip the ends of the speaker wires. 2. Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the speaker wire connection: [a] Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire to RIGHT +. [b] Connect the right speaker negative (-) wire to RIGHT -. [c] Connect the left speaker negative (-) wire to LEFT-. [d] Connect the left speaker positive wire (+) to LEFT+. 10