NEC PX-42VM2A 42MP2 - Page 19
Basic Operations
View all NEC PX-42VM2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Basic Operations POWER To turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet. 2. Press the POWER ON button (on the remote controller) to turn on. The monitor's POWER/STANDBY indicator will light up(green) when the unit is on. 3. Press the POWER OFF button (on the remote controller or the unit) to turn off. The monitor's POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control). DIGITAL ZOOM Digital zoom specifies the picture position and enlarges the picture. 1. Press the pointer button to display the pointer. ( ) To change the size of the picture: Press the ZOOM+ button and enlarge the picture. The pointer will change to resemble a magnifying glass. ( ) A press of the ZOOM- button will reduce the picture and return it to its original size. To change the picture position: Select the position with the vwᮤ ᮣ buttons. 2. Press the pointer button to delete the pointer. VOLUME To adjust the volume: 1. Press and hold the VOLUME v button (on the remote controller or the unit) to increase to the desired level. 2. Press and hold the VOLUME w button (on the remote controller or the unit) to decrease to the desired level. MUTE To cancel the sound: Press the MUTE button on the remote controller to cancel sound; press again to restore. DISPLAY To check the settings: 1. The screen changes each time the DISPLAY button is pressed. 2. If the button is not pressed for approximately three seconds, the menu turns off. 12