NEC PX-50M5A 5000W - Page 38

Setting a computer image to the correct RGB select screen On the computer image select the RGB mode, moving image (video) mode, wide mode or digital broadcast. Example: Setting the RGB SELECT mode to "VIDEO" Press the MENU button on the remote controller to display the MAIN MENU on the screen, then... 1. Use the v and w buttons to select "FUNCTION", then press the "OK" button. The "FUNCTION" screen appears. 2. Use the v and w buttons to select "RGB SELECT". FUNCTION POWER MGT : OFF RGB SELECT : RGB HD SELECT : 1080I OSM : ON GRAY LEVEL : 3 PLE : AUTO PICTURE SIZE : ON RESET RETURN EXIT OK 3. To set the RGB select mode to "VIDEO" ... Use the ᮤ and ᮣ buttons to select "VIDEO". The mode switches as follows each time the ᮤ or ᮣ button is pressed:  RGB ↔ VIDEO ↔ WIDE ↔ DTV  Information Ⅵ RGB SELECT modes These 4 mode are not displayed in correct image automatically. RGB ......... VESA 640‫ן‬480@60Hz (Use this mode for normal computer images.) VIDEO ...... To display the video signal that is converted to the RGB signal, set this mode. WIDE ........ When an 852 dot‫ ן‬480 line signal with a vertical frequency of 31.72 KHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE. DTV .......... Set this model when watching digital broad casting (480P). Ⅵ Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. FUNCTION POWER MGT : OFF RGB SELECT : VIDEO HD SELECT : 1080I OSM : ON GRAY LEVEL : 3 PLE : AUTO PICTURE SIZE : ON RESET RETURN EXIT OK 4. Once the setting is completed ... Press the "MENU" button. The RGB select mode is set to "VIDEO", and the menu disappears. 31