NEC V423-AVT Users Manual - Page 23

English H RESOLUTION Adjusts the horizontal size of the image. - VGA input only V RESOLUTION Adjusts the vertical size of the image. - VGA input only INPUT RESOLUTION VGA input only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. After selection, execute "AUTO SETUP" if required. If no problem is detected, the only available option will be "AUTO". AUTO ASPECT Select the aspect ratio of the screen image. FULL NORMAL Displays the aspect ratio the same as it is sent from the source. - FULL Fills entire screen. - WIDE Expands a 16:9 letter box signal to fill entire screen. - DYNAMIC Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image area - will be cut off due to expansion. TILE MATRIX becomes invalid. 1:1 Display the image in a 1 by 1 pixel format. (If the input resolution is higher than a 1920 x 1080 - resolution, the image will be scaled down to fit the screen). TILE MATRIX becomes invalid. ZOOM The image can be expanded beyond the active display area. The image which is outside of active - display area is not shown. ZOOM Maintains the aspect ratio while zooming. - H ZOOM Amount of horizontal zoom. V ZOOM Amount of vertical zoom. H POS Horizontal position. V POS Vertical position. RESET Resets the following settings within the ADJUST menu back to factory setting: AUTO ADJUST, - H POSITION, V POSITION, CLOCK, PHASE, H RESOLUTION, V RESOLUTION, ASPECT. AUDIO VOLUME Increases or decreases output volume level. 40 BALANCE Adjust the balance of L/R volume. Press + button to move the stereo sound image to right. Press - button to move the stereo sound image to left. CENTER TREBLE To accentuate or reduce the high frequency sound. 0 Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. BASS To accentuate or reduce the low frequency sound. 0 Press + button to increase BASS sound. Press - button to decrease BASS sound. SURROUND Artificial surround sound. Note: Audio out is disabled when this function is set to ON. OFF PIP AUDIO Selects source of PIP audio. MAIN AUDIO LINE OUT Selecting "VARIABLE" enables control of the line out level with the VOLUME button. Note: Audio out is disabled when this function is set to ON. FIXED AUDIO INPUT Selects audio input source [IN1], [DPORT], [HDMI], [OPTION]*. Depend on signal input RESET Resets "AUDIO" options back to factory settings except VOLUME. - SCHEDULE OFF TIMER Sets the monitor to power off after a length of time. A time between 1 to 24 hours is available. OFF SCHEDULE SETTINGS Creates a working schedule for the monitor to use. - SCHEDULE LIST List of schedules. - DATE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the "SCHEDULE" function to operate. See page 27. YEAR Configures the year for the real-time clock. - MONTH Configures the month for the real-time clock. - DAY Configures the day for the real-time clock. - *: The product you purchased may not have this feature. English-21