NEC V423-AVT Users Manual - Page 32
Controlling the LCD monitor via RS-232C Remote Control - pdf
View all NEC V423-AVT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NOTE: When you use this function, EXTERNAL CONTROL should be "RS-232C" (See page 23). Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC MultiSync MultiSync PC (Out) IN OUT RS-232C (IN) RS-232C (OUT) RS-232C (IN) RS-232C (OUT) RS-232C Cable RS-232C Cable MultiSync NOTE: If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your dealer for details. Check the "ID=ALL REPLY" setting in "EXTERNAL CONTROL". * In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model. Do not connect to other types of equipment. To control monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for the control command can be found on the CD included with the display. The file is called "External_control.pdf". Multiple monitors that are daisy-chained have a limit to the conectable monitor. 1) Interface PROTOCOL BAUD RATE DATA LENGTH PARITY BIT STOP BIT FLOW CONTROL RS-232C 9600 [bps] 8 [bits] NONE 1 [bit] NONE This LCD monitor uses RXD, TXD and GND lines for RS-232C control. The reverse type cable (null modem cable) (not include) should be used for RS-232C control. English-30