NEC VT440 User Manual - Page 22

Connecting Your DVD Player DVD player L R Cr Cb Y Cr Cb Y White Red Audio Equipment L R Red White INRPGRUBTGB INPUATUDIO OUTPUT IN PC-CONTROL S-VIDEO OUT OUT IN VIDEO Optional 15-pin-to-RCA‫ן‬3 cable (Component V ) Audio cable (not supplied) You can connect your projector to a DVD player with component outputs or Video output. To do so, simply: 1. Turn off the power to your projector and DVD player. 2. If your DVD player has the component video (Y,Cb,Cr) output, use the optional 15-pin-to-RCA‫ן‬3 cable to connect your DVD player to the RGB INPUT connector on the projector. For a DVD player without component video (Y,Cb,Cr) outputs, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector. 3. Turn on the projector and DVD player. NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements, E-22