NEC VT491 VT49/490/491/590/595/695 UM - Page 17
Installation and Connections, (1) Setting Up the Screen and the Projector, Selecting a Location (
UPC - 050927254161
View all NEC VT491 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: POWERSTATUSLAMP ON/STAND BY SOURCE AUTO ADJ. ENTER SELECT EXIT MENU ZOOM FOCUS 1 Set up a screen and the projector. 2 Connect your computer or video equipment to the projector. (→ page 13,14,15,16,17,18) 3 Connect the supplied power cable. (→ page 19) NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap. ᕡ Setting Up the Screen and the Projector Selecting a Location (VT695) The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m) measured diagonally when the projector is roughly 38 inches (1.0 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 389 inches (9.9 m) from the wall or screen. Screen Size (Unit: cm/inch) 609.6(W)ן457.2(H) / 240(W)ן180(H) 300" Screen Size 487.7(W)ן365.8(H) / 192(W)ן144(H) 240" 406.4(W)ן304.8(H) / 160(W)ן120(H) 365.8(W)ן274.3(H) / 144(W)ן108(H) 304.8(W)ן228.6(H) / 120(W)ן90(H) 200" 180" 243.8(W)ן182.9(H) / 96(W)ן72(H) 150" 203.2(W)ן152.4(H) / 80(W)ן60(H) 120" 162.6(W)ן121.9(H) / 64(W)ן48(H) 100" 121.9(W)ן91.4(H) / 48(W)ן36(H) 80" 81.3(W)ן61.0(H) / 32(W)ן24(H) 61.0(W)ן45.7(H) / 24(W)ן18(H) 42.7(W)ן32(H) / 17(W)ן13(H) Lens center POWERSTATUSLAMP ON/STAND BY SOURCE AUTO ADJ. ENTER SELECT EXIT MENU ZOOM FOCUS 60" 213"04" 0" 0.72/ 91.0/38 1.35/ 1 2.0/77 2.6/103 3.3/129 3.9/155 4.9/194 5.9/233 6.6/259 Distance (Unit: 7.9/311 m/inch) 9.9/389 TIP: • The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb. • The Zoom lever adjusts the image size +/-10% • For more details on throw distance, see page 11. 9