NEC VT595 NP115 : RS232 codes- Projectors - Page 2
Connection Method - projector
UPC - 050927253591
View all NEC VT595 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2. Connection Method The following 3 kinds of connection methods are available for sending and receiving control commands. 1. Serial connection using the serial port on the projector A serial cable is required. 2. USB connection using the USB port on the projector A USB cable is required. 3. LAN connection 3-1. LAN connection using a wired LAN card A wired LAN card and LAN cable are required. 3-2. LAN connection using a wireless LAN card A wireless LAN card is required. 3-3.LAN connection using the LAN port on the projector A LAN cable is required. 3-4. LAN connection using a wireless LAN unit A wireless LAN unit is required Status of supported connection
======================================================================
2. Connection Method
----------------------------------------------------------------------
The following 3 kinds of connection methods are available for sending and receiving control commands.
1. Serial connection using the serial port on the projector
A serial cable is required.
2. USB connection using the USB port on the projector
A USB cable is required.
3. LAN connection
3-1. LAN connection using a wired LAN card
A wired LAN card and LAN cable are required.
3-2. LAN connection using a wireless LAN card
A wireless LAN card is required.
3-3.LAN connection using the LAN port on the projector
A LAN cable is required.
3-4. LAN connection using a wireless LAN unit
A wireless LAN unit is required
Status of supported connection