NEC X463UN Users Manual - Page 11
Terminal Panel, RGB/HV IN [R, G, B, H, V] BNC - daisy chain
View all NEC X463UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Terminal Panel English Option control unit AC IN MAIN POWER RS-232C REMOTE OUT OUT LAN REMOTE IN RS-232C IN DISPLAYPORT OUT IN From Option control unit DVI-D OUT DVI-D IN H V B, Cb/Pb (IN) (IN) (IN) L/R L (IN2) (IN3) R L VGA IN HDMI R, Cr/Pr (IN) VIDEO OUT AUDIO RGB/HV OUT DVD/HD VIDEO2 AUDIO IN SPEAKER VIDEO 1 S-VIDEO IN IN G, Y, VIDEO (IN) L/R (IN1) R (IN3) ³ AC IN connector Connects with the supplied power cord. · Main Power Switch On/Off switch to turn main power ON/OFF. » LAN port (RJ-45) LAN connection. See page 33. ¿ REMOTE IN/OUT Use the optional wired remote control by connecting it to your monitor. NOTE: When you use Remote IN/OUT, IR CONTROL in OSD menu should be NORMAL. NOTE: Do not use this connector unless specified. ´ RS-232C (D-Sub 9 pin) IN connector: Connect RS-232C input from external equipment such as a PC in order to control RS-232C functions. OUT connector: Connect RS-232C output. To connect multiple MultiSync monitors via RS-232C daisy Chain. ² DISPLAYPORT connector IN connector: To input DisplayPort signals. OUT connector: To output DisplayPort signals. NOTE: DisplayPort connectors are for image only. No sound comes out. ¶ DVI (DVI-D) IN connector: To input digital RGB signals from a computer or HDTV device having a digital RGB output. * This connector does not support analog input. OUT connector: To output the DVI signal from either DVI IN or HDMI connection. To output the DVI signal from the HDMI connection, the HDMI input must be selected. º HDMI connector To input digital HDMI signals. ¾ VGA IN (mini D-Sub 15 pin) To input analog RGB signals from a personal computer or from other RGB equipment. µ RGB/HV IN [R, G, B, H, V] (BNC)* To input analog RGB signals or signals from other RGB equipment. This is also to connect equipment such as a DVD player, HDTV device and Set-Top-Box. Sync-on-Green signal can be connected to the G connector. This input can be used with an RGB, DVD/HD or Video source. Please select signal type in TERMINAL SETTING. ¸ VIDEO 1 IN connector (BNC)* To input a composite video signal. ¹ VIDEO OUT connector (BNC) To output the composite video signal from the VIDEO IN connector. Ƹ AUDIO OUT To output the audio signal from the AUDIO IN 1, 2, 3 and HDMI to an external device (stereo receiver, amplifier, etc.). ƹ S-VIDEO IN connector (Mini DIN 4 pin) To input the S-video (Y/C separate signal). ƺ AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a computer, VCR or DVD player. ƻ EXTERNAL SPEAKER TERMINAL To output the audio signal from AUDIO 1, 2, 3 and HDMI. Red terminal is plus (+). Black terminal is minus (-). Note: This speaker terminal is for 15W + 15W (8 ohm) speaker. English-9