NEC X463UN Users Manual - Page 17

English Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Second monitor* Computer (Analog) DVD player with SCART OUT Stereo Amplifier DVD player with HDMI out Computer (Digital) *: Multiple monitors that are daisy-chained have a limit to the connectable monitors. NOTE: Solid lines = video signal. Dotted lines = audio signal. VCR or DVD Player DVD player Connected equipment AV PC Connecting terminal DVI (DVI-D) HDMI 5BNC+VIDEO VIDEO1 (BNC) S-VIDEO VIDEO2 (5BNC) DVD/HD (5BNC) VGA (D-Sub) DVI (DVI-D) RGB/HV (5BNC) DisplayPort HDMI Setting in Terminal Mode Input signal name DVI MODE: DVI-HD RAW/EXPAND*1 BNC MODE: SCART - BNC MODE: VIDEO BNC MODE: COMPONENT DVI MODE: DVI-PC BNC MODE: RGB RAW/EXPAND*1 DVI HDMI SCART VIDEO1 S-VIDEO VIDEO2 DVD/HD VGA DVI RGB/HV DPORT HDMI Connecting Audio terminal AUDIO IN1, IN2, IN3 HDMI AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 HDMI Input button in remote control DVI HDMI DVD/HD VIDEO S-VIDEO VIDEO DVD/HD VGA DVI RGB/HV DISPLAYPORT HDMI *1: depend on signal type. • AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] in AUDIO INPUT in OSD menu or press the AUDIO INPUT button (optional remote control). English-15