Nady 401X QUAD Manual - Page 10

Specifications Overall System Performance Frequency Response...30-18KHz (-3dB) Dynamic Range...120dB (20-20KHz) Total Harmonic Distortion 0.5% (typical) RF Carrier Frequency Range 170-230MHz (Factory installed Channels) Frequency Stability 0.005%, crystal controlled Modulation FM (F3E), +/-15KHz nor,+/-30KHz max Operating Range 250 feet typical - up to 500+ feet optimum line-of-sight TRANSMITTERS Audio Inputs WHT Nady DM-10D neodymium dynamic cartridge WLT/WGT 3.5mm mono locking jack for connecting to omni or unidirectional lavalier mic or unidirectional headworn mic, with phantom power (WLT); or connecting to instrument cable (WGT) Controls WHT...OFF/STANDBY/ON switch WLT/WGT OFF/STANDBY/ON switch, input level adjust LED Indicator Unit "ON" (single flash), Low Battery Alert (steady) RF Power Out 50mW (Max. allowed by FCC) Harmonic & Spurious Emissions 40dB Battery...9V Alkaline Battery Life...Up to 20 hours Dimensions WHT 9.5" X 1.4" diameter. (24.1 X 3.5 cm) WLT/WGT 4.1" X 2.4"X 0.8" (10.4 X 6.1 X 2.0 cm) Weight (w/o battery) WHT...6.9 oz (193 g) WLT/WGT...3.6 oz (101 g) RECEIVER Controls Power ON/OFF, volume control, mute control Connectors 1 unbalanced adjustable mixed (all four channel) ¼" T-S audio output jack. Line level, 600 ohms 4 balanced fixed level XLR. #1=GND, #2-3=signals Line/Mic level, 11k/600 ohms Receiver 2.1 mm barrel-type DC input jack (tip=positive) LED Indicators 1 Power ON LED, 4 AF LED, 4 TX ON LED Dimensions 1.75" x 7.5" x 16.5" (4.4 x 19 x 42 cm) Weight...4.5 lbs (2 Kg) Power Requirements 16V @ 800mA, nominal, AC/DC adapter supplied Antenna Connectors Dual female BNC connectors 10