Naxa NHS-2005 NHS-2005 English Manual - Page 9
Bluetooth/AUk
![]() |
View all Naxa NHS-2005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPTICAL INPUT 1. Connect a Digital Optical Audio Cable to the optical output on the audio source and to OPTICAL IN on the unit. 2. Power on the unit and the audio source. 3. Press MODE button repeatedly to switch to OPT in Mode. 4. Audio from the connected audio source will now be played through the unit. TROUBLE SHOOTING Symptom Radio sound distorted. No radio sound. Possible Cause 1. The station is not tuned in. 2. There is a poor signal in the area. 1. The unit is not at tuner mode. 2. The volume has been muted or is on the minimum setting. No Sound at Bluetooth mode. 1. The unit is not connected with the audio source device. 2. The unit is placed out of the range. 3. The volume has been muted or is on the minimum setting. Sound is distorted at Bluetooth/AUk Line in modes. Sound source is distorted. No sound at AUX/Line in modes. 1. The unit is not connected the external appliance properly. 2. The volume has been muted or is on the minimum setting. Solution 1. Fine tune the station. 2. Unwind the wire antenna for best reception. 1. Press MODE button repeatedly until switching to tuner. 2. Adjust the volume level or press the MUTE button to resume audio. 1. Follow the manual to connect the audio source device to the unit. 2. Relocate the unit within Bluetooth operating range. 3. Adjust the volume level or press the MUTE button to resume audio. If the original sound source of the external device is poor quality or with distortion and noise, it will be easily noticed with high-power speakers. Try a different audio source. 1. Follow the manual to reconnect the audio appliance to the unit. 2. Adjust the volume level or press MUTE button to resume audio. Page 8
![](/manual_guide/products/naxa-nhs2005-nhs2005-english-manual-c41524a/9.png)