Naxa NHS-2011 English and Spanish Manual - Page 10
Connecting Power, Getting Started, Turning the Unit On and Off, Setting the Source Mode
View all Naxa NHS-2011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting Power Getting Started Use the included AC power adapter to connect the unit to AC household power. •• Connect the two-pronged end of the adapter to a household power outlet. •• Connect the barrel plug end of the adapter to the Power socket [7] of the unit. ⚠⚠The adapter supports AC 100-240V power only. Do not connect the power adapter to a power outlet other than that which is indicated here and on the rating label of the power adapter as this may result in the risk of fire or electric shock. Turning the Unit On and Off To turn the unit on, press and hold POWER/SOURCE [8]. To place the unit in Standby mode, press and hold POWER/SOURCE [8] until the SOURCE LED [2] turns red. To turn the unit off completely, disconnect the unit from power. Setting the Source Mode Press POWER/SOURCE [8] to set the active source mode. This controls which connection is being used. Disconnect the unit from power if it will not be used for a long time. The SOURCE LED [2] will light to indicate which mode has been selected when POWER/SOURCE [8] is pressed. Do not handle the power plug with wet hands. Doing so may cause electric shock. Do not use the adapter with any other power source. Source LED Blue Indigo Connection Mode Bluetooth® Optical In audio input [4] Page 10 Naxa Electronics