Naxa NPB-252 NPB-252 English Manual - Page 9

Symptom, Possible Cause, Solution

Page 9 highlights

Symptom Possible Cause Solution Noise or sound distorted on AM or FM broadcast AM or FM no sound CD player will not play CD skips while playing Intermittent sound from CD player Sound appears distorted at high volume setting - Station not tuned properly for AM or FM. - FM: FM telescopic antenna is not extended. - AM: The bar antenna is not positioned correctly - Unit not in "RADIO" function mode. - Volume set at minimum - Unit not in CD function mode. - CD is not loaded properly. - If the CD is self-compiled, the media used may not be compatible with the player. - Disc is dirty or scratched. - Dirty or defective disc - Dirty pick up lens - Player is subject to excessive shock or vibration - Volume control is set to maximum. - Retune the AM or FM broadcast station. - FM: Extend FM telescopic antenna. - AM: Reposition the unit until the best reception is obtained. - Slide Function Switch to "RADIO" position. - Increase Volume. - Select CD function mode. - Load CD with label side up. - Use better quality blank media and retest. - Wipe CD with clean cloth or use another disc. - Clean or replace the defective disc. - Use a CD lens cleaning disc to clean the lens. - Relocate the player away from shock or vibration. - Adjust Volume Control to a lower comfortable level. E-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

E-8
Symptom
Possible Cause
Solution
Noise or sound distorted
on AM or FM broadcast
- Station not tuned properly for AM or
FM.
- FM: FM telescopic antenna is not
extended.
- AM: The bar antenna is not positioned
correctly
- Retune the AM or FM broadcast
station.
- FM: Extend FM telescopic antenna.
- AM: Reposition the unit until the best
reception is obtained.
AM or FM no sound
- Unit not in “RADIO” function mode.
- Volume set at minimum
- Slide Function Switch to “RADIO”
position.
- Increase Volume.
CD player will not play
- Unit not in CD function mode.
- CD is not loaded properly.
- If the CD is self-compiled, the media
used may not be compatible with the
player.
- Select CD function mode.
- Load CD with label side up.
- Use better quality blank media and
retest.
CD skips while playing
- Disc is dirty or scratched.
- Wipe CD with clean cloth or use
another disc.
Intermittent sound from
CD player
- Dirty or defective disc
- Dirty pick up lens
- Player is subject to excessive shock
or vibration
- Clean or replace the defective disc.
- Use a CD lens cleaning disc to clean
the lens.
- Relocate the player away from
shock or vibration.
Sound appears
distorted at high volume
setting
- Volume control is set to maximum.
- Adjust Volume Control to a lower
comfortable level.