Naxa NPB-266 Red NPB-266 manual - English - Page 13

Listening to USB Connect a USB memory device to the USB port [4] found on the top of the unit, then press the STANDBY/FUNC. button [15] to select "USB" mode. The display will flash "READING" and then playback will start automatically the first track. LLConnect USB memory devices directly to the USB port of the boombox. Do not use a USB extension cable or hub as these may introduce interference that will result in abnormal performance. the USB port. This USB port is not designed for devices that require a lot of power (e.g., USB hard drives or disc drives). LLThere are many different USB stick types and manufacturers. Although this player should support most of these memory devices, it is impossible to guarantee compatibility with ALL USB drives. If your USB device can be turned on, turn it on when using it with the player. USB Operation About USB Drives This player can play supported audio files from USB stick drives connected to the USB port [4]. For a list of supported audio files, please refer to the Specifications section of this manual. The file system of the USB drive must be formatted as FAT or FAT32. Other file systems are not supported. The unit will not work with computers connected to 1. To start, pause, or resume playback, press the / M+/ button [17]. 2. To stop playback, press the /M-/ID3 button [20]. LLProgram playback and repeat playback modes work the same way during USB playback as during CD playback. Please refer to section "CD/MP3 OPERATION" to learn more about these modes. www.naxa.com Page 13