Naxa NPB-266 Red NPB-266 manual - English - Page 14

Bluetooth® Operation 1. When you set the Boombox to Bluetooth mode (by press the /FUNC. button [15]) and it does not detect a paired device, it will automatically switch to pairing mode. (The display will flash "Bluetooth" and the blue "PAIR" indicator will blink when the Boombox is in pairing mode.) If connection fails, the PAIR indicator will keep flashing. 2. Press the /FUNC. button [15] to select BLUETOOTH mode. The boombox will attempt to connect to a paired Bluetooth® audio device. If a paired device is not detected, he PAIR indicator will flash rapidly; the boombox is ready to be paired with a Bluetooth® device. If this is your first time using a Bluetooth device with the boombox, complete the steps below to pair them together. is complete 5. Press the /M+/ button [17] to start playback. You can also control playback with your device. 6. Press the [13] or [11] buttons to adjust the volume level. LLNote: The Bluetooth works best within 10 meters. To disconnect an Bluetooth device from the boombox, press and hold the /M+/ until the PAIR indicator flashes blue. To learn more about how to use the Bluetooth audio function of your device, please refer to the instructions provided by the device manufacturer. 3. Make sure Bluetooth is enabled on the Bluetooth device. Use the device to scan/search for other Bluetooth devices (i.e., the boombox). 4. Select " NAXA NPB-266 " from the results. Use the password "0000" if the device asks for one. The PAIR indicator will light blue when the connection Page 14 Naxa Electronics