Netgear 8-Stream User Manual - Page 37
Con a router with advanced MAC settings to work with your extender
View all Netgear 8-Stream manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Nighthawk AX8 8-Stream WiFi 6 Mesh Extender By default, the Dynamically get IP Address from Router radio button is selected. 7. Select the Use Static IP Address radio button. 8. Complete the fields to specify the IP network IP addresses. 9. Click the SAVE button. Your settings are saved. Configure a router with advanced MAC settings to work with your extender If you enabled a WiFi MAC filter, WiFi access control, or access control list (ACL) on your router, when a WiFi device connects through the extender to your router, the MAC address of the WiFi device shown on the router is translated to another MAC address. If your router's MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender but cannot get an IP address from the extender and cannot access the Internet. To allow the WiFi device to receive an IP address from the extender and access the Internet, you must provide translated MAC address to the router. To add a translated MAC address to your router and reserve an IP address for your extender 1. Log in to your router and disable the MAC filter, WiFi access control, or ACL. For more information about how to disable your router's MAC filter, WiFi access control, or ACL, see your router's documentation. 2. Power on the extender and connect all of your WiFi devices to the extender. 3. Make sure that the Router Link LED remains lit. Extender Network Settings 37 User Manual