Netgear AC4000-Nighthawk User Manual - Page 10
LEDs and Buttons on the Top Panel, Table 1. LED descriptions, Hardware Setup - nighthawk x6s setup
View all Netgear AC4000-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Nighthawk X6S AC4000 Tri-Band WiFi Router LEDs and Buttons on the Top Panel The status LEDs are located on the top of the router. Table 1. LED descriptions LED Power Internet 2.4 GHz WiFi 5 GHz 1 WiFi 5 GHz 2 WiFi USB 3.0 port USB 2.0 port Description • Solid white. The router is ready. • Blinking white. The router is not ready, firmware is upgrading, or the Reset button was pressed. • Off. Power is not supplied to the router. • Solid white. An Ethernet connection is established. • Blinking white. The port is sending or receiving traffic. • Off. No Ethernet cable is connected between the router and the modem. • Solid white. The 2.4 GHz WiFi radio is operating. • Blinking. The router is sending or receiving WiFi traffic. • Off. The 2.4 GHz WiFi radio is off. • Solid white. The 5 GHz 1 WiFi radio is operating. • Blinking. The router is sending or receiving WiFi traffic. • Off. The 5 GHz 1 WiFi radio is off. • Solid white. The 5 GHz 2 WiFi radio is operating. • Blinking. The router is sending or receiving WiFi traffic. • Off. The 5 GHz 2 WiFi radio is off. The USB 3.0 LED is for the USB 3.0 USB port. The USB 2.0 LED is for the USB 2.0 port. • Solid white. A USB device is connected and is ready. • Blinking. A USB device is plugged in and is trying to connect. • Off. No USB device is connected, or someone clicked the Safely Remove Hardware button and it is now safe to remove the attached USB device. Hardware Setup 10