Netgear AC750-WiFi Installation Guide - Page 12
Use the Extenders in Access Point Mode
 |
View all Netgear AC750-WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Use the Extenders in Access Point Mode You can use the extenders as WiFi access points, which creates new WiFi hotspots using a wired Ethernet connection. 1. Plug an extender into an electrical outlet. Wait for the Power LED to light green. If the Power LED does not light, press the Power On/Off button. 2. Use an Ethernet cable to connect the Ethernet port on the extender to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN access. The extender joins the LAN and creates a WiFi hotspot. 12
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
 |
 |
12
Use the Extenders in Access Point Mode
You can use the extenders as WiFi access points, which creates new WiFi
hotspots using a wired Ethernet connection.
1.
Plug an extender into an electrical outlet.
Wait for the Power LED to light green. If the Power LED does not light,
press the
Power On/Off
button.
2.
Use an Ethernet cable to connect the Ethernet port on the extender
to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN
access.
The extender joins the LAN and creates a WiFi hotspot.