Netgear CM1150V User Manual - Page 8
Rear Panel, Table 1. LED descriptions Continued, Rear panel, Hardware Setup - ethernet ports
View all Netgear CM1150V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Voice Cable Modem Table 1. LED descriptions (Continued) Ethernet Tel 1 and 2 • Green. A powered-on device is connected to the Ethernet port at 1000 Mbps. • Amber. A powered-on device is connected to the Ethernet port at 10 Mbps or 100 Mbps. • Off. No device is connected to the Ethernet port. • Blinking green or amber. The Ethernet port is processing traffic. • Solid green. The Tel 1 or 2 port is online. • Blinking green. The Tel 1 or 2 port is processing a call or the phone is off-hook. • Off. The Tel 1 or 2 port is not in use. Rear Panel The connections and button on the rear panel are shown in the following figure. Figure 3. Rear panel Hardware Setup 8
Table 1. LED descriptions (Continued)
•
Green
. A powered-on device is connected to the Ethernet
port at 1000 Mbps.
•
Amber
. A powered-on device is connected to the Ethernet
port at 10 Mbps or 100 Mbps.
•
Off
. No device is connected to the Ethernet port.
•
Blinking green or amber
. The Ethernet port is processing
traffic.
Ethernet
•
Solid green
.The Tel 1 or 2 port is online.
•
Blinking green
.The Tel 1 or 2 port is processing a call or
the phone is off-hook.
•
Off
.The Tel 1 or 2 port is not in use.
Tel 1 and 2
Rear Panel
The connections and button on the rear panel are shown in the following figure.
Figure 3. Rear panel
Hardware Setup
8
Voice Cable Modem