Netgear CM2050V User Manual - Page 10

Nighthawk CM2050V 2.5 Gbps Ultra-High Speed Cable Telephony Modem Viewed from top to bottom, the back panel contains the following components: • Reset button. Pressing the Reset button resets your cable modem. If the Reset button is pressed for at least seven seconds, the Power LED blinks white and your cable modem returns to its factory settings. • Ethernet port. For installation and activation, connect a computer to the Ethernet port. After you install your cable modem and activate your Internet service, you can disconnect your computer and connect a router to the Ethernet port. • Tel 1 and 2 ports. Connect your phone line to the Tel 1 port. Note: The Tel 2 port works only for a two-phone-line subscription. • Coaxial cable port. Connect the cable port to a cable wall outlet. • DC power connector. Connect the power adapter that came in the product package to the DC power connector. Label The cable modem label shows the login information, MAC address, and serial number. Figure 3. Cable modem label System Requirements You need the following to install your cable modem: • Compatible operating system: - Windows 10 - Windows 8 - Windows 7 Hardware Setup 10 User Manual