Netgear EA101 Installation Guide - Page 2

Start Here Instructions in this guide are for users of Windows® who are installing the Model EA101 USB Ethernet Adapter. For instructions on installing and verifying the Windows network driver, refer to "Install the Network Driver" on the other side of this guide. These four easy steps provide information for installing your Model EA101 USB Ethernet Adapter: 1. Verify Package Contents 2. Install the Network Adapter 3. Connect the Network Adapter and Cables 4. Install the Network Driver As a last step, be sure to fill out and send in your warranty card. To register online, direct your Web browser to the Web page at: http://www.netgear.com Verify Package Contents Unpack the contents of the package and make sure that you have everything. Model EA101 USB Ethernet Adapter Drivers and Diagnostics Disk Category 5 10/100 Mbps UTP cable (provided with Model EA101C Ethernet Adapter) Installation guide, Warranty & Owner Registration Card, and Support Information Card 9309FA Verify PC Requirements The instructions given in this guide are for using the NETGEAR™ Model EA101 USB Ethernet Adapter in a PC that has a Microsoft® Windows 98® operating system. Model EA101 USB Ethernet Adapter Installation Guide