Netgear EA101 Installation Guide - Page 3
Install the Network Adaptere, Some PCs have two USB ports. The Model EA101 USB Ethernet Adapter
 |
View all Netgear EA101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Install the Network Adaptere The Model EA101 USB Ethernet Adapter is hot swappable, which means it can be inserted into a PC that is either turned off or powered on. 1. Insert the Model EA101 USB Ethernet Adapter into the USB (universal serial bus) as shown in the illustration below. Some PCs have two USB ports. The Model EA101 USB Ethernet Adapter can be inserted into either port. 2. Insert the Category 5 10/100 Mbps UTP cable into the RJ-45 plug at the end of the Model EA101 USB Ethernet Adapter. Model EA101 USB Ethernet Adapter 9308FA 3. Turn on power to the PC, if you have chosen to install the adapter with the power turned off. Model EA101 USB Ethernet Adapter Installation Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
-
11
-
12
-
13
 |
 |
Model EA101 USB Ethernet Adapter Installation Guide
The Model EA101 USB Ethernet Adapter is hot swappable, which means it can
be inserted into a PC that is either turned off or powered on.
1.
Insert the Model EA101 USB Ethernet Adapter into the USB (universal
serial bus) as shown in the illustration below.
Some PCs have two USB ports. The Model EA101 USB Ethernet Adapter
can be inserted into either port.
2.
Insert the Category 5 10/100 Mbps UTP cable into the RJ-45 plug at the
end of the Model EA101 USB Ethernet Adapter.
3.
Turn on power to the PC, if you have chosen to install the adapter with
the power turned off.
Install the Network Adaptere
Model EA101
USB Ethernet
Adapter
9308FA