Netgear EX3110 Installation Guide - Page 2
Access Extender Settings, Support - manual
View all Netgear EX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Connect With the NETGEAR Installation Assistant 1. On a computer or mobile device, open the WiFi connection manager and find and connect to the extender network called NETGEAR_EXT. When you are connected to the extender, the Device LED lights. 2. Launch a web browser. 3. Visit www.mywifiext.net. The NETGEAR installation assistant displays. 4. Follow the prompts to connect your extender to your existing WiFi network. 5. Unplug the extender and move it to a new location about halfway between your router and the area with a poor WiFi signal. DO DON'T The location that you choose must be within the range of your existing WiFi router network. 6. Plug the extender into an electrical outlet and wait for the Power LED to light green. 7. Use the Router LED to help you choose a spot where the extender-to-router connection is optimal. 8. If the Router LED doesn't light amber or green, plug the extender into an outlet closer to the router and try again. Keep moving the extender to outlets closer to the router until the Router LED lights amber or green. 9. Reconnect your computer or mobile device to the new extender WiFi network. 10. Test the new extended WiFi range by moving your computer or mobile device to the area with a poor router WiFi signal: a. Leave your computer or mobile device in the area with a poor router WiFi signal and return to the extender. b. Check the Device LED on the extender: • If the Device LED is solid green or amber, your new extender WiFi network reaches the area with a poor router WiFi signal and your network setup is complete. • If the Device LED is red, your new extender WiFi network does not reach the area with a poor router WiFi signal. You must move your computer or mobile device closer to the extender until the Device LED turns solid green or amber. 11. Plug the extender into an electrical outlet and wait for the Power LED to light green. If the Power LED does not light, press the Power On/Off button. Access Extender Settings After installation, you can log in to the extender to view or change the extender's settings. 1. Launch a web browser from a computer or mobile device that is connected to your extender network. When you are connected to the extender, the Device Link LED lights. 2. Log in to your extender: • If your extender and router use different WiFi network names (SSIDs), visit www.mywifiext.net. • If your extender and router use the same WiFi network name (SSID), enter http://