Netgear EX6400 Installation Guide - Page 13
Use the Extender in Access Point Mode
View all Netgear EX6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Use the Extender in Access Point Mode You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using a wired Ethernet connection. 1. Set the Access Point/Extender switch to Wired Access Point . 2. Plug the extender into an electrical outlet and wait for the Power LED to light green. If the Power LED does not light, press the Power On/Off button. 3. Use an Ethernet cable to connect the Ethernet port on the extender to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN access. The extender joins the LAN and creates a WiFi hotspot. 13
13
Use the Extender in Access Point Mode
You can use the extender as a WiFi access point, which creates a new WiFi
hotspot by using a wired Ethernet connection.
1.
Set the
Access Point/Extender
switch to
Wired Access Point
.
2.
Plug the extender into an electrical outlet and wait for the Power LED
to light green.
If the Power LED does not light, press the
Power On/Off
button.
3.
Use an Ethernet cable to connect the Ethernet port on the extender
to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN
access.
The extender joins the LAN and creates a WiFi hotspot.