Netgear EX7000-1AZNAS Installation Guide - Page 1
Netgear EX7000-1AZNAS Manual
View all Netgear EX7000-1AZNAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Set Up the Access Point Nighthawk AC1900 WiFi Access Point Model EX7000 Quick Start Guide Ethernet cable Modem router or router Access point ¾¾ To set up the access point: 1. Use an Ethernet cable to connect your modem router or router to an Ethernet port on the access point. Note: Do not connect your access point directly to your DSL or cable modem. The access point does not function as a router. If your network includes a DHCP server, you can connect the access point to a switch or hub that is connected to the DHCP server. 2. Open the WiFi network manager on your WiFi-enabled computer or mobile device and find and connect to the access point WiFi network called NETGEAR_EXT. When you are connected to the access point, the Device to Extender LED lights solid green. Note: If you connect your computer to the access point using an Ethernet connection, you cannot set up the access point. You can connect your computer and other devices to the access point using an Ethernet connection after the setup. 3. Launch a web browser. 4. Enter www.mywifiext.net in the address field of the browser. A login page displays. 5. Click the NEW EXTENDER SETUP button. The Extender Setup page displays. 6. Complete the Extender Setup page and click the NEXT button. 7. Click the ACCESS POINT button. The access point checks for an Internet connection. 8. Set the network name (SSID), security option, and password for each band, and click the NEXT button. Your settings are applied. 9. Use a WiFi network manager on your WiFi-enabled computer or mobile device to connect to the new access point WiFi network. 10. Click the CONTINUE button. A message displays that you successfully created an access point.