Netgear FS526T FS726T User Manual - Page 12
For a Network without a DHCP Server, Discover, Configuration Setting, Disable, Web Access - default ip
View all Netgear FS526T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Smart Switch Series Software Manual For a Network without a DHCP Server 1. Connect your switch to your existing network. 2. Power on your switch by plugging in the power cord. 3. The default IP is 192.168.0.239. 4. Install the Smartwizard Discovery program on your PC. 5. Start the Smartwizard Discovery utility. 6. Click Discover to find your switch. 7. Click Configuration Setting. Figure 3-4: Assigning the switch a static IP address 8. Choose Disable on DHCP. 9. Enter your IP address, Gateway and Subnet. Then, type your password and click Set. Make sure your PC and your switch are in the same subnet. Note: You can always assign a Static IP address to your switch no matter if your network has a DHCP server or not. 10. Select your switch by clicking on it. Then click Web Access. 3-3 Getting Started July 2005