Netgear FSM7326P FSM7326P Hardware manual - Page 27
Troubleshooting, Troubleshooting Chart
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 4 Troubleshooting Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. Table 4-1. Troubleshooting Problem Power LED is off. Link LED is off or intermittent. Cause No power is received. Port connection is not working. Solution Check the power cord connections for the switch at the switch and the connected device. Make sure that all cables used are correct and comply with Ethernet specifications. Check the crimp on the connectors and make sure that the plug is properly inserted and locked into the port at both the switch and the connecting device. Make sure that all cables used are correct and comply with Ethernet specifications. See Appendix A, "Technical Specifications". Check for a defective adapter card, cable, or port by testing them in an alternate environment where all products are functioning. File transfer is slow or performance degradation is a problem. Half- or full-duplex setting on the switch and the connected device are not the same. Make sure that the attached device is set to auto negotiate. Check the system message log. Troubleshooting 4-1 v1.0, March 2006