Netgear FSM7352S FSM7352S Hardware manual - Page 10
Table 2-1. LED Descriptions for FSM7328S - fan
UPC - 606449038880
View all Netgear FSM7352S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Managed Stackable Layer 3 Fast Ethernet Switches Hardware Installation Guide The following table shows the LEDs on the front panel of the switch. Table 2-1. LED Descriptions for FSM7328S LED Description Master Green: This switch is the master of the stack. Off: The switch is not the master of the stack. Power Solid green: Power is supplied, and the switch is operating normally. Blinking green: Runtime code load in progress. Solid yellow: Power-On Self-Test (POST) in progress. Blinking yellow: POST failure or CPU failure. Off: Power is disconnected. Fan Solid red: Fan has failed. Off: Fan is present and operating normally. 10/100M ports One LED per port Link/ACT/SPD LED • Off: No 10/100 Mbps link is established on the port. • Solid green: A valid 100 Mbps link is established on the port. • Blinking green: The port is sending or receiving packets at 100 Mbps. • Solid yellow: A valid 10 Mbps link is established on the port. • Blinking yellow: The port is sending or receiving packets at 10 Mbps. 10/100/1000M ports two LEDs per port Link/ACT LED • Off: No 10/100/1000 Mbps link is established on the port. • Solid green: A valid 1,000 Mbps link is established on the port. • Solid yellow: A valid 10/100 Mbps link is established on the port. • Blinking green: Packets transmission or reception is occurring on the port at 1,000 Mbps. • Blinking yellow: The port is sending or receiving packets at 10/100 Mbps. Stack LED • Green: Stack port has a valid link connection. • OFF: Stack port does not have a valid link connection. SFP port (1000 Mbps only) • Solid green: Link is up. • Blinking green: The port is sending or receiving a packet in link up status . • Off: No link is detected . 2-2 Introduction v1.0, March 2006