Netgear FSM7352S FSM7352S Hardware manual - Page 26
Connecting a Redundant Power Supply to the FSM7352PS, Connecting Equipment to the Switch, RJ-45 Ports
UPC - 606449038880
View all Netgear FSM7352S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Hardware Installation Guide for Managed Stackable Layer 3 Fast Ethernet Switches Connecting a Redundant Power Supply to the FSM7352PS The FSM7352PS switch has a redundant power supply connector in the back. Redundant power supply connector Power receptacle Figure 3-3 You can connect a DC-to-DC power supply to the switch in case the primary power supply fails. To connect a redundant power supply to the switch, first turn off the switch. Then connect the redundant power supply to the switch. Once all connections are completed, apply power to the switch. Connecting Equipment to the Switch You can connect devices, an SPF Gigabit Ethernet module, and a console to the switch. RJ-45 Ports The switch uses Auto Uplink technology, which enables you to attach devices using either straight-through or crossover cables. Use a Category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector. Note: Ethernet specifications limit the cable length between the switch and the attached device to 328 feet (100 meters). Gigabit Module Bay You can install an SFP Gigabit Ethernet module in the gigabit module bays. SFP modules are sold separately. 3-8 Hardware Installation v1.0, March 2006