Netgear FVL328 FVL328 Reference Manual - Page 23
The Firewall’s Rear Panel, Factory Default Reset push button
UPC - 606449025811
View all Netgear FVL328 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2 You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on the front panel of the firewall. These LEDs are green when lit, except for the TEST LED, which is amber. Table 2-1: LED Descriptions Label Activity Description POWER On TEST On Off Internet 100 On/Blinking LINK/ACT (Activity) On/Blinking LOCAL 100 LINK/ACT (Link/Activity) On/Blinking On/Blinking Power is supplied to the firewall. The system is initializing. The system is ready and running. The Internet port is operating at 100 Mbps. The port detected a link with the Internet WAN connection and is operating at 10 Mbps. Blinking indicates data transmission. The Local port is operating at 100 Mbps. The Local port has detected a link with a LAN connection and is operating at 10 Mbps. Blinking indicates data transmission. The Firewall's Rear Panel The rear panel of the FVL328 (Figure 2-2) contains the connections identified below. Figure 2-2: FVL328 Rear Panel Viewed from left to right, the rear panel contains the following elements: • Factory Default Reset push button • Eight Local Ethernet RJ-45 ports for connecting the firewall to local computers • Internet WAN Ethernet RJ-45 port for connecting the firewall to a broadband modem • AC power adapter input Introduction 2-7 May 2004, 202-10030-02