Netgear FVS318NA FVS318 Reference Manual - Page 67
Configuring VPN Network Connection Parameters, Manual Keys
UPC - 606449027969
View all Netgear FVS318NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall - Manual Keys: Does not use IKE. Rather, you manually enter all the authentication and key parameters. You have more control over the process however the process is much more complex and there are more opportunities for errors or configuration mismatches between you FVS318 and the corresponding VPN endpoint gateway or client workstation. You need to configure matching VPN settings on both VPN endpoints. The outbound VPN settings on one end must match to the inbound VPN settings on other end, and vice versa. Configuring VPN Network Connection Parameters All VPN tunnels on the FVS318 VPN Firewall require configuring the same network parameters. This section describes those parameters and how to access them. Click the VPN Settings link of the Setup section of the main menu, click the radio button of a VPN tunnel on the VPN Settings menu, and then click the Edit button to display the default Main Mode menu shown in Figure 6-2. The kinds of network connection information you provide are the same for the Main Mode, Aggressive Mode, and Manual Keys options. Figure 6-2: FVS318 VPN tunnel network connection configuration menu Virtual Private Networking 6-3 M-10146-01