Netgear FVS336G-100NAS Reference Manual - Page 112
Configuring the ProSafe VPN Client for ModeConfig, Pre-Shared Key
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Configuring the ProSafe VPN Client for ModeConfig From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN client connection. To configure the client PC: 1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor window, click the New Policy editor icon. a. Give the connection a descriptive name such as "modecfg_test". (This name will only be used internally). b. From the ID Type pull-down menu, choose IP Subnet. c. Enter the IP Subnet and Mask of the VPN firewall (this is the LAN network IP address of the gateway). d. Check the Connect using radio button and choose Secure Gateway Tunnel from the pull- down menu. e. From the ID Type pull-down menu, choose Domain name and enter the FQDN of the VPN firewall; in this example it is "local_id.com". f. Choose Gateway IP Address from the second pull-down menu and enter the WAN IP address of the VPN firewall; in this example it is "172.21.4.1". 2. From the left side of the menu, click My Identity and enter the following information: a. Click Pre-Shared Key and enter the key you configured in the FVS336G IKE menu. b. From the Select Certificate pull-down menu, choose None. c. From the ID Type pull-down menu, choose Domain Name and create an identifier based on the name of the IKE policy you created; for example "salesperson11.remote_id.com". d. Under Virtual Adapter pull-down menu, choose Preferred. The Internal Network IP Address should be 0.0.0.0. Note: If no box is displayed for Internal Network IP Address, go to Options/ Global Policy Settings, and check the box for "Allow to Specify Internal Network Address." e. Select your Internet Interface adapter from the Name pull-down menu. 3. On the left-side of the menu, choose Security Policy. 5-24 Virtual Private Networking Using IPsec v1.0, October 2007