Netgear GA620 GA620 Installation Guide - Page 5
Connect the Network Cables, Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT
View all Netgear GA620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connect the Network Cables Using the appropriate fiber cable (as outlined in one of the tables below), connect the fiber port on a network hub or switch to the port on the card. The port on the card performs autonegotiation and supports full-duplex operation. PC with network card installed Power plug Server with Model GA620 Gigabit Ethernet card installed NETGEAR Model FS509 Fast Ethernet Switch Printer (optional) 10/100 Mbps 1 Gbps 50 µm or 62.5 µm multimode fiber cable with duplex SC connector Fiber port 8898FA Multimode Fiber Operating Range 62.5/125-Micron* 2 to 260 meters 50/125-Micron* 2 to 550 meters * Shortwave laser optics (850 nm) Description of Port LEDs Label Activity Description LINK Blinking slowly On Off The port is disabled. A good link exists on the port. No link exists on the port. DATA Blinking or On Data is detected on the port. Off No data is detected on the port. Model GA620 Gigabit Ethernet Card Installation Guide for Windows NT