Netgear GA621 Reference Guide - Page 23
Moving the Network Card to a Different Slot
![]() |
View all Netgear GA621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Table 3-1. Parameter Descriptions Property Description Address Allows you to change the network address. Packet Size Enables sending larger Ethernet packets Priority Queues Specifies the priority number for traffic prioritization. Receive Buffers Specifies hardware resources in memory used to receive packets. VLAN ID Used to specify VLAN ID number. Moving the Network Card to a Different Slot Windows 98 automatically detects the installation and removal of hardware.To move a GA621 Fiber Gigabit Ethernet Card to a different slot in the same system: 1. Shut down the system and remove the card from the PCI slot. 2. Install the card in its new PCI slot (see "Installing Your Fiber Gigabit Ethernet Card" on page 2-7). 3. When the system is powered on, reinstall the driver software (see "Installing the Driver Software" on page 3-1). Windows 95 OSR2/98/Me driver software 3-6
![](/manual_guide/products/netgear-ga621-reference-guide-e030727/23.png)