Netgear GS108Tv2 GS108T/ GS110TP Smart Switch Software Administration Manual - Page 221
Factory Default, Maintenance, Reset, Apply
View all Netgear GS108Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Factory Default Use the Factory Default page to reset the system configuration to the factory default values. Note: If you reset the switch to the default configuration, the IP address is reset to 192.168.0.239, and the DHCP client is enabled. If you loose network connectivity after you reset the switch to the factory defaults, see Connecting the Switch to the Network on page 11 . To access the Factory Defaults page, click Maintenance Reset Factory Default. To reset the switch to the factory default settings: 1. Select the check box on the page. 2. Click Apply. The switch resets immediately. Chapter 7: Maintaining the System | 221
Chapter 7:
Maintaining the System
|
221
GS108T and GS110TP Smart Switch Software Administration Manual
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
Note:
If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see
Connecting the Switch to the Network
on page
11 .
To access the Factory Defaults page, click
Maintenance
Reset
Factory Default
.
To reset the switch to the factory default settings:
1.
Select the check box on the page.
2.
Click
Apply
. The switch resets immediately.