Netgear GS724TPS GS7xxTPS Hardware manual - Page 15
Stacking, member of the stack is named stack slave. - software
UPC - 606449061086
View all Netgear GS724TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GS700TPS Smart Switch • Standard 1U high, rack mountable 19"chassis. • Fan speed control supported The GS724TPS supports the following PoE functions: • Smart Power Managed function handles the power of each port in the event of limited available power. • Supports the 24-Port PoE function as follows: • 15.4W for 12 ports • 8W for 24 ports for a total of 192W for PoE. The GS724TPS, using data pairs (RJ-45 1, 2, 3 and 6 pin), provides power to the PD. GS748TPS supports the following PoE functions: • The Smart Power Managed function handles the power of each port in the event of limited available power. • Supports the 48-Port PoE functions as follows: • 15.4W for 24 ports • 8W for 48 ports for a total of 384W for PoE. The GS748TPS, using data pairs (RJ-45 1, 2, 3 and 6 pin), provides power to the PD. Stacking A stack can be controlled and managed from a single unit called the master unit. Any other unit member of the stack is named stack slave. In particular, firmware can be downloaded from the stack master to the other units in the stack. A unit serving as Stack Master runs the fully operational software of a switch. In addition, it runs the master part of the Distributed Switching Application that configures and manages all other units in the stack. Generally, the master operates the remote Slave's low-level drivers, thorough the Distributed Switching application part that is running in the context of the Slave. During the Stacking setup, the switches will auto-select one as the Stacking Master. All other devices are named as slave stack members, and assigned a unique Unit ID. One of the slave units is designated as the backup master. The backup master acts as a slave stack master, but can become a Introduction 1-5 v1.0, April 2009