Netgear GS724TS-100NAS GS7xxTS User Manual - Page 22
Password Change, Firmware Upgrade, from the Switch Setting The Password Change screen
View all Netgear GS724TS-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
GS700TS Smart Switch Software Administration Manual Password Change You can set a new password of up to 20 ASCII characters. 1. Click Password Change from the Switch Setting section. The Password Change screen appears. You can set a new password. You must enter the old and new passwords and confirm the new one. 2. Click Set to enable the new password. Firmware Upgrade The GS700TS Smart Switch software is upgradeable, and enables your switch to take advantage of improvements and additional features as they become available. The upgrade procedure assumes that you have downloaded or otherwise obtained the firmware upgrade and that you have it available as a binary file on your computer. This procedure uses the TFTP protocol to implement the transfer from computer to switch. . Note: You can also upgrade the firmware using the Download menu of the switch (see "Download"). If you click Firmware Upgrade from the main screen (see Figure 1-1), after you have selected the switch to upgrade, the following screen appears: 1-9 Getting Started with Switch Management v1.0, June 2009