Netgear GS724TS-100NAS GS7xxTS User Manual - Page 99
Speed, Duplex Mode, Auto Negotiation, Flow Control, APPLY, Enable - Enables auto negotiation.
View all Netgear GS724TS-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
GS700TS Smart Switch Software Administration Manual - Enable - Reactivates the suspended LAG. - Disable - Does not reactivate the suspended LAG. • Type - Displays the LAG type. The possible field values are: - Static - Indicates the LAG is configured manually. - LACP - Indicates the LAG is configured automatically. • Speed - Select the data transmission rate for the LAG. The LAG type determines what speed setting options are available. The possible field values are: - 10M - Indicates the LAG is currently operating at 10 Mbps. - 100M - Indicates the LAG is currently operating at 100 Mbps. - 1000M - Indicates the LAG is currently operating at 1000 Mbps. • Duplex Mode - Displays the duplex mode of the LAG. The possible field values are: - Full - Indicates the interface supports transmission between the device and its link partner in both directions simultaneously. - None - Indicates Duplex mode is not enabled on the LAG. • Auto Negotiation - Select the auto negotiation status of the LAG. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate and flow control abilities to its partner. Auto Negotiation is enabled by default. The possible field values are: - Enable - Enables auto negotiation. - Disable - Disables auto negotiation. • Flow Control - Select the flow control status of the LAG. Operates when the LAG is in full duplex mode. Flow Control is disabled by default. The possible field values are: - Enable - Enables flow control. - Disable - Disables flow control. 2. Select the interface. 3. Enter or modify the fields in the first row. 4. Click APPLY to update the device. Configuring Switching Settings 4-6 v1.0, June 2009