Netgear GS748TR GS748TR Hardware manual - Page 23
Step 3: Checking the Installation
UPC - 606449054552
View all Netgear GS748TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
GS700TR Series Hardware Installation Guide 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Figure 4-1 Step 3: Checking the Installation Before applying power perform the following: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly. • Check cable routing to make sure cables are not damaged or creating a safety hazard. • Ensure all equipment is mounted properly and securely. Installation v1.0, December 2007 4-15
GS700TR Series Hardware Installation Guide
Installation
4-15
v1.0, December 2007
5.
Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack.
Step 3: Checking the Installation
Before applying power perform the following:
•
Inspect the equipment thoroughly.
•
Verify that all cables are installed correctly.
•
Check cable routing to make sure cables are not damaged or creating a safety hazard.
•
Ensure all equipment is mounted properly and securely.
Figure 4-1