Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 119
Step 2: Con the GSM7352S
View all Netgear GSM7224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
ProSafe Managed Switch 3. Create VLAN 200 with port 0/44 and assign IP address 192.168.200.1/24. (Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 200 (Netgear Switch) (Vlan)#vlan routing 200 (Netgear Switch) (Vlan)#exit (Netgear Switch) #configure (Netgear Switch) (Config)#interface 0/44 (Netgear Switch) (Interface 0/44)#vlan pvid 200 (Netgear Switch) (Interface 0/44)#vlan participation include 200 (Netgear Switch) (Interface 0/44)#exit (Netgear Switch) (Config)#interface vlan 200 (Netgear Switch) (Interface-vlan 200)#routing (Netgear Switch) (Interface-vlan 200)#ip address 192.168.200.1 255.255.255.0 (Netgear Switch) (Interface-vlan 200)#exit 4. Add two static routes so that the switch forwards the packets for which the destinations are 192.168.40.0/24 and 192.168.50.0/24 to the correct next hops. (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#ip route 192.168.40.0 255.255.255.0 192.168.200.2 (Netgear Switch) (Config)#ip route 192.168.50.0 255.255.255.0 192.168.200.2 5. Create an ACL that denies all the packets with TCP flags +syn-ack. (Netgear Switch) (Config)#access-list 101 deny tcp any flag +syn -ack 6. Create an ACL that permits all the IP packets. (Netgear Switch) (Config)#access-list 102 permit ip any 7. Apply ACLs 101 and 102 to port 0/44; the sequence of 101 is 1 and of 102 is 2. Step 2: Configure the GSM7352S (See Figure 15, One-Way Web access using a TCP flag in an ACL on page 117.) 1. Enter the following commands. (Netgear Switch) (Config)#interface 0/44 (Netgear Switch) (Interface 0/44)#ip access-group 101 in 1 (Netgear Switch) (Interface 0/44)#ip access-group 102 in 2 (Netgear Switch) (Interface 0/44)#exit Chapter 10. ACLs | 119