Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 166

ProSafe Managed Switch CoS Queue Configuration CoS queue configuration involves port egress queue configuration and drop precedence configuration (per queue). The design of these on a per-queue, pe- drop precedence basis allows you to create the service characteristics that you want for different types of traffic. Port egress queue configuration: • Scheduler type, strict vs. weighted • Minimum guaranteed bandwidth • Maximum allowed bandwidth per-queue shaping • Queue management type, tail drop vs. WRED Drop precedence configuration (per queue): • WRED parameters - Minimum threshold - Maximum threshold - Drop probability - Scale factor • Tail drop parameters, threshold Per-interface basis: • Queue management type, rail Drop vs. WRED Only if per-queue configuration is not supported • WRED decay exponent • Traffic shaping for an entire interface Show classofservice Trust The example is shown as CLI commands and as a Web interface procedure. CLI: Show classofservice Trust To use the CLI to show CoS trust mode, use these commands: (Netgear Switch) #show classofservice trust? Press Enter to execute the command. (Netgear Switch) #show classofservice trust Class of Service Trust Mode: Dot1P 166 | Chapter 11. CoS Queuing