Netgear GSM7228PS 7000 Series Managed Switch Administration Guide for Software - Page 358
Con Switch GSM7328S_2, Tunnel, ProSafe 7000 Managed Switch Release 8.0.3
UPC - 606449071696
View all Netgear GSM7228PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
ProSafe 7000 Managed Switch Release 8.0.3 Configure Switch GSM7328S_2 (Netgear Switch) #show interfacet tunnel 0 Interface Link Status Up IPv6 is enabled IPv6 Prefix is FE80::C0A8:101/128 2000::1/64 MTU size 1280 bytes #show interface tunnel TunnelId Interface TunnelMode SourceAddress DestinationAddress 0 tunnel 0 6 in 4 Configured 192.168.1.1 192.168.1.2 (Netgear Switch) # ping ipv6 2000::2 Send count=3, Receive count=3 from 2000::2 Average round trip time = 1.00 ms (Netgear Switch) #config (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#ipv6 forwarding (Netgear Switch) (Config)#ipv6 unicast-routing (Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#routing (Netgear Switch) (Interface 1/0/13)#ip address 192.168.1.2 255.255.255.0 (Netgear Switch) (Interface 1/0/13)#exit (Netgear Switch) (Config)#interface tunnel 0 (Netgear Switch) (Interface tunnel 0)#ipv6 enable (Netgear Switch) (Interface tunnel 0)#ipv6 address 2000::2/64 (Netgear Switch) (Interface tunnel 0)#tunnel mode ipv6ip (Netgear Switch) (Interface tunnel 0)#tunnel source 192.168.1.2 (Netgear Switch) (Interface tunnel 0)#tunnel destination 192.168.1.1 (Netgear Switch) (Interface tunnel 0)#exit (Netgear Switch) (Config)#exit (Netgear Switch) #show interface tunnel TunnelId -------0 tunnel Interface --------- 0 TunnelMode ---------6 in 4 Configured SourceAddress 192.168.1.2 DestinationAddress 192.168.1.1 358 | Chapter 24. Tunnel