Netgear GSM7248R Configuring IGMP Snooping - Page 1
Netgear GSM7248R Manual
View all Netgear GSM7248R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
7000 Series - Configuring IGMP Snooping (Multicasting) The aim of this document is to describe the steps to setup and test IGMP Snooping The purpose Internet Group Management Protocol (IGMP) snooping is to restrain multicast traffic in a switched network. By default, a LAN switch floods multicast traffic within the broadcast domain and this can consume a lot of bandwidth if many multicast servers are sending streams to the segment. Multicast IP addresses are Class D IP addresses. Therefore, all IP addresses from 224.0.0.0 to 239.255.255.255 are multicast IP addresses. IGMP Snooping can be very effective in network environments where Multicast applications like Video/Audio streaming are being used. Table of Contents Software ...2 Physical Setup...2 Logical Setup...2 Network Diagram...2 CONFIGURATION - Management IP address and IGMP 3 Set the Management IP address 3 IGMP snooping implementation 3 Enable IGMP Snooping (CLI) on VLAN 1 3 Enable IGMP snooping on any VLAN 3 TESTING - Multicast ...4