Netgear GSM7312 FSM7326P User Manual - Page 228

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Exchange start - the first step in creating an adjacency between the two neighboring routers, the goal is to decide which router is the master and to decide upon the initial DD sequence number. Exchange - the router is describing its entire link state database by sending Database Description packets to the neighbor. Loading - Link State Request packets are sent to the neighbor asking for the more recent LSAs that have been discovered (but not yet received) in the Exchange state. Full - the neighboring routers are fully adjacent and they will now appear in router-LSAs and network-LSAs. Events The number of times this neighbor relationship has changed state, or an error has occurred. Permanence This variable displays the status of the entry, either dynamic or permanent. This refers to how the neighbor became known. Hellos Suppressed This indicates whether Hellos are being suppressed to the neighbor. The types are enabled and disabled. Retransmission Queue Length Is an integer representing the current length of the retransmission queue of the specified neighbor router Id of the specified interface. show ip ospf neighbor brief This command displays the OSPF neighbor table list. When a particular neighbor ID is specified, detailed information about a neighbor is given. The information below will only be displayed if OSPF is enabled. Format Mode show ip ospf neighbor brief Privileged EXEC and User EXEC Router ID Is 4 digit dotted decimal number representing the neighbor interface. IP Address Is an IP address representing the neighbor interface. Neighbor Interface Index Is a slot/port identifying the neighbor interface index. show ip ospf range This command displays information about the area ranges for the specified . The identifies the OSPF area whose ranges are being displayed. 9-46 202-10009-01_060204 Routing Commands