Netgear GSM7312 FSM7326P User Manual - Page 253
match vlan, Policy Commands
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software To specify the match condition as a single keyword notation, the value for is one of the supported port name keywords (listed below). The currently supported values are: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these translates into its equivalent port number, which is used as both the start and end of a port range. To specify the match condition as a numeric value, one layer 4 port number is required. The port number is an integer from 0 to 65535. To specify the match condition as a range, two layer 4 port numbers are required and together they specify a contiguous port range. Each port number is an integer from 0 to 65535, but with the added requirement that the second number be equal to or greater than the first. The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all source layer 4 ports except for those within the range specified here). The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all source layer 4 port numbers except for the one specified here). Default None Format match [not] srcl4port { | []} Mode Class-Map Config match vlan This command adds to the specified class definition a match condition based on the value of the layer 2 VLAN Identifier field of a packet. The VLAN ID is an integer from 1 to 4094. The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all VLAN Identifier values except for what is specified here). Default None Format match [not] vlan Mode Class-Map Config Policy Commands The 'policy' command set is used in DiffServ to define: CLI Commands: Differentiated Services 202-10009-01_060204 10-11