Netgear GSM7328SNA 7000 Series Managed Switch Administration Guide for Softwar - Page 246

ProSafe 7000 Managed Switch Release 8.0.3 c. In the VLAN Type field, select Static. d. Click Add. 2. Add ports to VLAN 2000. a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the following displays. b. In the VLAN ID list, select 2000 . c. Click Unit 1. The ports display. d. Click the gray boxes under ports 1 and 24 until U displays. The U specifies that the egress packet is untagged for the port. e. Click Apply. 3. Set force authorized mode on ports 1/0/6 and 1/0/12. a. Select Security > Port Authentication > Advanced > Port Authentication. A screen similar to the following displays. b. Scroll down and select the Interface 1/0/6 and 1/0/12, check boxes. c. In the Control Mode list, select Force Authorized. d. Click Apply to save settings. 4. Enable dot1x on the switch. 246 | Chapter 14. Security Management