Netgear GSM7328SNA 7000 Series Managed Switch Administration Guide for Softwar - Page 60

ProSafe 7000 Managed Switch Release 8.0.3 6. Click Apply to save the settings. VLAN Routing with RIP Routing Information Protocol (RIP) is one of the protocols that routers can use to exchange network topology information. It is characterized as an interior gateway protocol, and is typically used in small to medium-sized networks. Layer 3 switch Port 1/0/2 VLAN Router port 1/3/1 192.150.3.1 Router port 1/0/5 192.150.4.1 Port 1/0/3 VLAN Router port 1/3/2 192.150.4.1 Router Layer 2 switch Layer 2 switch VLAN 10 VLAN 20 Figure 8. VLAN routing RIP configuration example This example adds support for RIPv2 to the configuration created in the base VLAN routing example. A second router, using port routing rather than VLAN routing, has been added to the network. CLI: Configure VLAN Routing with RIP Support 1. Configure VLAN routing with RIP support on a 7000 Series Managed Switch. (Netgear Switch) #vlan data (Netgear Switch) (Vlan)#vlan 10 (Netgear Switch) (Vlan)#vlan 20 (Netgear Switch) (Vlan)#vlan routing 10 (Netgear Switch) (Vlan)#vlan routing 20 (Netgear Switch) (Vlan)#exit (Netgear Switch) #conf 60 | Chapter 6. RIP