Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 274
Outbound Telnet, CLI: show network
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 4. Click Apply. Outbound Telnet In this chapter, the following examples are provided: • "CLI: show network" on page 18-8 • "CLI: transport output telnet" on page 18-9 • "CLI: session-limit and session-timeout" on page 18-10 Outbound Telnet: • Establishes an outbound telnet connection between a device and a remote host • A telnet connection is initiated, each side of the connection is assumed to originate and terminate at a "Network Virtual Terminal" (NVT) • Server and user hosts do not maintain information about the characteristics of each other's terminals and terminal handling conventions • Must use a valid IP address CLI: show network (Netgear Switch Routing) >telnet 192.168.77.151 Trying 192.168.77.151... (Netgear Switch Routing) User:admin Password: (Netgear Switch Routing) >en Password: (Netgear Switch Routing) #show network IP Address 192.168.77.151 Subnet Mask 255.255.255.0 Default Gateway 192.168.77.127 Burned In MAC Address 00:10:18.82.04:E9 Locally Administered MAC Address......... 00:00:00:00:00:00 MAC Address Type Burned In Network Configuration Protocol Current... DHCP Management VLAN ID 1 Web Mode Enable Java Mode Disable 18-8 v1.0, November 2008 Tools